Oxyacetylene Welding - The Plug Weld - Fusion and Bronze (Panel Beating)

Pricing

16.95AUDIn Stock
DVD: $16.95 Add To Cart
Preview
  • YouTube thumbnail

Description

This DVD demonstration is presented in two parts -  (Fusion and Bronze plugging) and each part is complete within itself. Thus each deals with material, preparation, flame setting, judging the correct working temperature of the material, application of the filler, finishing off the plug and possible problems learners may encounter.
Duration: 12 minutes.

Classifications

AQF - Australian Quality Framework
Certificate II, Certificate III, Certificate IV

Industry Classification Scheme
Automotive Industry

Copyright Description

Copyright © 2017 TAFE SA, Government of South Australia. All rights reserved. Terms and conditions apply.

Catalogue Item

TAFEshop Identifier: TAFESA-652

TAFEshop Catalogue: 92.052

TAFE SA

Related Resources


Repair by Hand Dolly Blocking & Filing

By virtue of their use inner guards have never been subject to a perfect finish. So when they are damaged, we are not looking for a perfect repair. This was particularly so on vehicles built prior to 1970 when materials were heavier (even in excess of 1 mm) and contained less carbon.
Duration: 6 minutes.

DVD$16.95

Edge Relieving (Panel Beating)

This presentation is the DVD component of a self paced, competency based, learning package. A step by step explanation of the theory and practice of edge relieving in thin sheet mild steel.  Starting with an "oil-canning" piece of steel we are introduced to the concept of stretching the material in the appropriate places by hammering.  Flattening out by means of a flat faced wooden mallet is then followed by plenishing with a steel plenishing hammer.
Duration: 4 minutes 40 seconds.

DVD$16.95

Oxyacetylene Welding - Outside Corner Weld (Panel Beating)

This presentation is the DVD component of a self paced, competency based, learning package. With the aid of a simple jig and some spring welding clamps the outside corner weld is probably the easiest oxyacetylene weld joint that a learner can attempt. The demonstration includes the initial setting up of the joint, tacking, starting the weld away from the edge (to eliminate edge burning for the learner) and how to finish the weld to an edge. The materials used are 1 mm mild steel and 1 mm filler wire. The demonstration weld is executed both with and without the use of filler wire.
Duration: 7 minutes.

DVD$16.95