Oxyacetylene Welding - Outside Corner Weld (Panel Beating)

Pricing

16.95AUDIn Stock
DVD: $16.95 Add To Cart
Preview
  • YouTube thumbnail

Description

This presentation is the DVD component of a self paced, competency based, learning package. With the aid of a simple jig and some spring welding clamps the outside corner weld is probably the easiest oxyacetylene weld joint that a learner can attempt. The demonstration includes the initial setting up of the joint, tacking, starting the weld away from the edge (to eliminate edge burning for the learner) and how to finish the weld to an edge. The materials used are 1 mm mild steel and 1 mm filler wire. The demonstration weld is executed both with and without the use of filler wire.
Duration: 7 minutes.

Classifications

AQF - Australian Quality Framework
Certificate II, Certificate III, Certificate IV

Industry Classification Scheme
Automotive Industry

Copyright Description

Copyright © 2017 TAFE SA, Government of South Australia. All rights reserved. Terms and conditions apply.

Catalogue Item

TAFEshop Identifier: TAFESA-645

TAFEshop Catalogue: 92.017

TAFE SA

Related Resources


Oxyacetylene Welding - Braze Welding versus Brazing - the lap joint

This presentation is the DVD component of a self paced, competency based, learning package. Neither brazing nor so-called braze welding is a fusion process. They are more akin to the lead/tin soldering processes. Only the temperatures required are much higher. Accordingly the demonstration explains what the process is, how bonding occurs and the importance of cleaning when preparing the joint. The selection of rods, tips and flame settings for both braze welding and brazing are detailed. Temperature control is stressed as it is very important for a successful joint with either process. The demonstration concludes with a series of typical problems experienced by the learner.
Duration: 11 minutes.

DVD$16.95

Removal and Replacement of Major Body Components (Panel Beating)

This presentation is the DVD component of a self paced, competency based, learning package. This demonstration introduces the beginner to the concepts of good/sound Removal and Replacement procedures. Through the specific R and R of a Front Bumper Assembly, a Hood or Bonnet, a Guard or Fender and a Door, emphasis is placed on safe handling methods and several suitable alternatives of identifying and storing parts and fasteners. The final word is, do it right. The person who dismantles is not always the person who re-assembles.
Duration: 16 minutes.

 

DVD$16.95

Hand cutting 6mm mild steel with oxyacetylene (Panel Beating)

This presentation is the DVD component of a self paced, competency based, learning package. The demonstration consists of a brief account of the principle, assembly of the torch, setting of the flame, appropriate tip angles, cutting from an edge or within the materials boundary, the use of cutting charts and concludes with faults and likely causes.
Duration: 8 minutes.

DVD$16.95